©2017 Hestan Commercial Corporation
9
EN
Ensure that the burners are positioned correctly on their orifices, and are fully seated onto their rear hanger
brackets (see Fig. 2). The burners should not move side-to-side or front-to-back if properly seated.
Above each U-burner is a stainless steel radiant tray containing specially shaped ceramic briquettes.
Position the radiant trays onto the lower ledge of the burner box in the grill, and then install the cooking
grates on the upper ledge (see Fig. 3). The burners and radiant trays work together to create a very even
heat, front-to-back, left-to-right. The radiant trays also serve to minimize flare-ups, and prevent blockages
of the burner ports from falling grease and debris. The radiant trays and U-burners must be used together
and are integral to the performance of the grill. Do not cook on the grill without them.
Note: Infrared Sear Burners do not require the radiant trays. NEVER place a radiant tray over a Sear
Burner.
VALVE
ORIFICE
AIR
SHUTTER
MANIFOLD
PIPE
Figure 2
COOKING GRATES
ON UPPER LEDGE
RADIANT TRAYS
ON LOWER LEDGE
Figure 3
LOCATING AND ASSEMBLING THE GRILL
(continued)
Summary of Contents for Aspire EAB30LPBU
Page 2: ......
Page 13: ... 2017 Hestan Commercial Corporation 11 EN INSTALLATION continued ...
Page 38: ...THIS PAGE LEFT INTENTIONALLY BLANK ...
Page 47: ......