7
Conversion
• Disconnect luminaire from mains, disassemble
cover
(A)
.
• For an unhindered light emission of the
LED KITs disassemble lamp cover
(B)
.
• Remove device carrier cover
(GTB)
by loosening the
fixing screw. Keep the fixing
screw for later use.
• Disassemble device carrier unit
(GT)
by loosening
the two screws M4
(S)
and by disconnecting
the existing device plug.
• Clean luminaire and reusable components
carefully.
• Connect the device plug to the LED KIT. Position
the LED KIT, similarly to the old device carrier, with
its carrier plate under the screws
(S)
and tighten
screws.
Note:
For asymmetrical versions, align the LED KIT
so that it shines in the desired direction (see dot
mark)
Note:
For further information on device plugs see
following page
• Fix device carrier cover with the existing fixing
screws on the M4 threaded bolt
(GB)
of the LED KIT.
• Reassamble luminaire with cover
(A)
completely.
• Connect luminaire with the mains and check func-
tion.
• Mark upgrade on LED, if necessary in the luminaire/
on the pole. Keep assembly instructions for mainte-
nance at a later date.
• Correctly dispose of removed materials/compo-
nents.
GT
GTB
GTB
GB
S
S
A
B
