6
Technical data
100%
dim
aus
T
dim
Level
ein
T
dim
To upgrade from luminaries equipped with HS_ /HI_ to LED.
HS_, HI_ 50W / 70W / 100W
LED KIT LA.06 -2x2 / -3x2 / -4x2
Nominal voltage
220-240V AC 50Hz
Nominal current
0.3 / 0.4 / 0.5A
Nominal range
26..32 / 36..42 / 48..54W
Power factor
>0.9
Protection rating
II
Nominal voltage of LED
<120V, SELV
Light distribution
various
Flux [klm]
2.5 / 4.4 / 6.4 klm
Luminous colour / CCT
NW(4000K)
Colour rendering index (CRI)
>80
Dimensions (LxWXH)
350 x 260 x 130mm³
Weight
1.4kg
Ambient temperature
-35...+35°C
Ingress protection
(upon installation)
IP20
Conformity
CE
Service life [h]
>60000
Special equipment
TempSafe (TS)
overtemperature protection
Constant Flux (CF)
over 50 000hr
AutomaticDimControl (ADC)
14 dimming profiles can be selected using a rotary
switch
Included in luminaire purchase
AutomaticDimControl (ADC) setting
The LED KIT is equipped with an OSRAM Optotronic4DIM
or Philips XITANIUM LED operating device to suit your
project. In this case, parameters for the dimming func-
tionality and dimming profile are set in the factory by
means of software programming as requested by the
customer. In order to set parameters for the ASTRODIM
function (automatic dimming, based on the middle of
the night), the Tdim
on
and Tdim
off
desired for the sys-
tem and the desired level of dimming (50% is standard)
should be communicated with the order. The values set
in the factory are shown on a sticker located next to the
type plate. The parameter settings can only be changed
using a specific programming adapter and a PC with the
corresponding programming software.
Using the PSt input, the LED KIT can be added to an
existing control phase. If this is done, the existing
control logic is detected automatically once switched
on for around 20min.
LED recessed luminaire head,
complete
