background image

Chapter 2 Safety information

Operating manual  HE 5710 / HE 5711

8

Version 1.3

Signal words

DANGER!

Indicates an immediate danger with 

high

 risk that will result in death or serious injury if not avoided.

WARNING!

Indicates  a  possible  danger  with 

medium

  risk  that  may  result  in  death  or  serious  injury  if  not

avoided.

CAUTION!

Indicates a danger with 

low

 risk that might result in slight or moderate injury if not avoided.

Structure of warning notes

All warning notes in these operating instructions are structured in a uniform manner. The pictogram
designates the type of danger.

2.2

Safety during the individual phases of operation

The following safety information must be observed when installing the device and during operation.

SIGNAL WORD!

An informative text describes the danger and suggests how it can be avoided.

Danger of electric shock!

Disconnect the power supply before working on the device. Install the electrical
lines in accordance with the respectively applicable local regulations (VDE 0100
in Germany). Lay the measuring lines separately from the power lines. Produce a
connection  between  the  protective  ground  connection  (in  the  respective  device
carrier) and a protective ground.

Danger of electric shock!

Any interruption of the protective ground in the device carrier may cause the de-
vice to become dangerous. Deliberate interruptions are not permissible. If it can
be  assumed  that  safe  operation  is  no  longer  possible,  then  the  device  shall  be
put out of commission and be secured against unintended operation or re-activa-
tion.

Danger of electric shock!

Do  not  open  the  device  under  voltage!  When  opening  the  devices  or  removing
covers  and  parts,  live parts  may  become exposed.  Connecting  points  may  also
be live!

Caution!

The  device  may  not  be  put  into  operation  when  there  is  visible  damage  on  the
device.

Summary of Contents for 57116510





















Reviews: