Hesai Pandar128E3X, User Manual

Page: 75 / 124

- 73 -
5.2 Check Live Data
Set the PC's IP address according to Section 2.4 (Get Ready to Use)
5.2.1 Cybersecurity Configuration
Users may select one of the three modes:
■ TLS Mode
· On the Security page of web control (see Section 4.9 - Security), turn ON the Cyber Security Master Switch and select TLS for PTC
Connection.
· In PandarView's PTC drop-down menu (see screenshot below), select PTCS. Thus PandarView automatically retrieves the LiDAR unit's
calibration file using PTCS commands.
· Click the "CA CRT" button (see screenshot below) and specify the file path of Hesai's CA certificate chain (Hesai_Ca_Chain.crt).
■ mTLS Mode
· On the Security page of web control, turn ON the Cyber Security Master Switch and select mTLS for PTC Connection.
· In PandarView's PTC drop-down menu (see screenshot above), select PTCS.
· Click the "CA CRT" button (see screenshot above) and specify the file path of Hesai's CA certificate chain (Hesai_Ca_Chain.crt).
· Click the "Client CRT" button and specify the file path of the user certificate.
· Click the "RSA Key" button and specify the file path of the user's private key.
NOTE The "Clear" button removes the specified file paths for CA CRT, Client CRT, and RSA Key.