Figure 4.5 Red dot sight diagram
Users can look through the red dot sight to achieve better aiming. The red dot sight is powered by the device . It automatically lights up after
powering on the device.
NOTE
The sight is effective when aiming over 15 m away. If the distance from the measured object is too short, the red dot will not overlap
with the green indication laser.
If the red dot and the green indicator laser do not overlap when aiming for a long distance (>15 m), the red dot calibration can be performed
by adjusting the knob on the sight.
If the red dot is higher than the green indication laser, turn the
knob counterclockwise to make it lower; if the red dot is lower
than the green indication laser, turn the knob clockwise to move
it up.
If the red dot is to the right of the green indication laser, turn
the knob counterclockwise to shift it to the left; if the red dot is
to the left of the green indication laser, turn the knob clockwise
to shift it to the right.
4.3 Instructions on the red dot sight
- 1 5 -
