Herutu TW-510T, Instruction Manual

Page: 15 / 32

9
5.To install on the Torque wrench
4)Hook the Transmitter on the Case holder of Seat, set it with an attention being
paid not to bite the cord, and fix it with the set screw as firmly pushing the case.
Case holder
<Installation and confirmation method of Limit switch>
When the lever movement reach of the torque spanner is small, it isn't possible to hit limit
switch, and a transmitter doesn't send. Please be careful sufficiently in case of a limit
switch installation. We'll recommend to install it using testers and confirm the state as
follows.
1. A wrench is made an adjustment to the use Newton value
2. The limit switch is tacked in a wrench.
3. The connector of wrench socket is set on the vice table or to fix it in order to
turn the bolt. Please be careful sufficiently not to be broken the wrench.
4. Limit switch is connected with a tester.(+)(-) is as follows.
5. A limit switch of a wrench moves a wrench to the done location and fixes
hexagon socket head cap bolt by the location a limit switch enters certainly.
A wrench has a roughly 2 sets of mounting hole, and the person who arrives
obediently is chosen. Hexagon socket head cap bolt is M2 and a mounting
hole of a
limit switch is φ 2.35, so it's adjusted by slanting having for this
difference. Please bend and don't adjust a lever. When the torque did the
location of the lever, it's adjusted at the location which isn't forced more than
level.