Herutu 21UD, Instruction Manual, Page: 55 / 84

21UD
47
Basic operation
6-6. Setting the Clear time Key [7]
This is the clear time setting procedure. Once the preset time is reached, the clear function
allows the planned quantity/production actual to set into
“0” and makes restarting. For this
machine, [CL] key should be pressed or the power source should be turned on/off once a
day. However, if the clear time is set before the beginning of the working hour, continuous
operation is enabled. The clear time can be set up to 3 times in total.
①
Press [7] key.
7
←
Display about 0.75seconds
↓
＊ ＊ ＊ ←
present data
＊ ＊ ←
number of times
②
Set the time at which you want to clear for the first time.
<e.g.> To set it at 7:55, input [7] [5] and [5] in this order.
If you have inadvertently set a wrong data, press [CLR] key and input once again.
7 5 5
←
present data
0 1
←
first
③
Press [ENT] to set the clear time.
The screen displays the clear time 2.
In the same manner as for the first time, set the second and third clear time.
＊ ＊ ＊ ←
present data
0 2
←
first
*You can get off/back the input screen using [+] [-] key.