Herutu 21UD, Instruction Manual, Page: 31 / 84

21UD
23
Function settings
5-2. Setting the tact precision Command [2]
①
Press [2] key, and tact precision setting screen appears.
If there is no need to change the setting contents, press [ENT] key to get back to the
Command selection screen.
2
←
Display about 0.75seconds
↓
0
←
present data
②
Input optional setting value .
1
←
input data
③
Here, press [ENT] to set the type, and Command selection screen comes back.
If you have inadvertently press a wrong type No, press [CLR] key to get back to the
status of
①
or overwrite the correct No to modify.
*Once the tact precision is changed, the tact unit, which is set at present, will be changed.
Therefore, if changed, be sure to reset the tact and tact reserve data.
If tact precision is changed from 1/10 into 1/100, the tact will become 1/10.
If changed from 1/100 into 1/10, the tact will become 10-fold value.
tact precision
０→０．１
second
１→０．０１
second