Hertz Marine PowerSports HMR-3 Owner'S Manual Download Page 30

Page: 30 / 40

marine_Owners manual HMR3.indd 30

04/04/18 15:55

GENERAL OPERATION TROUBLESHOOTING

Before going through the checklist, check wiring connection. If any of the problems persist after

checklist has been made, consult your nearest service dealer.

Symptom

Cause

Solution

No power

The ignition switch is not on.

If the power supply is connected to the

accessory circuits, but the engine is not

moving, switch the ignition key to “ACC”.

The fuse has blown

Replace the fuse.

No sound

Volume is in minimum

Adjust volume to a desired level.

Wiring is not properly connected. Check wiring connection.

Bluetooth audio is

interrupted by short

breaks

The music device is not covered or

obstructed the Bluetooth module

Ensure the music device is located

near the Bluetooth module. To prevent

interruption to audio streaming over

Bluetooth it is recommended that the

discoverable feature is turned off after

paring your device to the unit.

USB device is not

recognized

Note: Audio playback

from Android devices is

not supported

The USB device is damaged.

Disconnect USB device and reconnect.

If the device is still not recognized, try

replacing with a different USB device.

Connectors are loose

Check wiring connection(s).

No sound heard with the

display “No File” shown

No MP3/WMA files are stored on

the USB device

Store these files properly on the USB

device. USB does not work with Android

devices.

The radio does not

Work. The radio station

automatic selection does

not work

The antenna cable is not connected. Insert the antenna cable firmly.

The signals are too weak

Select a station manually.

Summary of Contents for Marine PowerSports HMR-3









































Search results

Summary of Contents for Marine PowerSports HMR-3

Reviews:

Related manuals for Marine PowerSports HMR-3

Brands by name

Popular brands

Hertz Marine PowerSports HMR-3, Owner'S Manual

Search results

Summary of Contents for Marine PowerSports HMR-3

Reviews:

Related manuals for Marine PowerSports HMR-3

Brands by name

Popular brands