Select XLS
General
Please note it is possible the heater may discolour with use
–
this is caused by airborne pollution and is not a
fault.
The heater is designed to last many years and incorporates several safety features, but if the heater has not
been used or installed in adherence to these instructions, emits any noise, smell, or shows rapid
discolouration of the surface, discontinue using the heater and refer to Herschel Customer Service or your
local Herschel dealer.
The Herschel panel must be installed, uninstalled, cleaned or transported only when cold.
Painting
The Select XLS White panels can be painted to match décor using a suitable heat resistant paint. However,
Herschel will not be responsible if the paint deteriorates or discolours. Any rights to return the heater for a
refund within statutory periods will be voided where the heater has been painted. Painting the panel will not
affect your warranty for repair or replacement.
Cleaning and maintenance
Cleaning
Before attempting to clean the panel, unplug the heater, isolate the unit from the electrical supply and allow
it to completely cool down.
DO NOT immerse the Herschel panel heater in water or splash water onto it.
Clean the heater with a damp cloth. For glass models glass cleaner can be used. Never use a wet cloth. When
clean, dry the surfaces with a dry cloth.
DO NOT apply abrasive materials, solvents or solvent wipes to the surface as this can cause irreparable
damage. Wait until the unit is completely dry before use.
Repair
DO NOT attempt to repair or adjust any electrical or mechanical functions on this unit, doing so will void your
warranty. Repairs must only be carried out by Herschel or an authorised Herschel service partner.
Disposal
The heater is an electrical product and must not be disposed of in household waste. A high percentage of the
heater can be recycled. Please treat as electrical waste and recycle in accordance with local regulations.
