T2 Wireless thermostat
T2 Wireless thermostat
The Herschel iQ T2 Thermostat & R2 receiver are designed to regulate Herschel
Infrared Heaters and incorporate the latest energy-saving features. These include
Herschel’s
open window technology and an adaptive start function ensuring your
room is always at the right temperature with the least energy use. When used with
wifi you can also regulate your heating remotely using the SmartLife App. SmartLife
also allows you to control the system by voice using Alexa or Google Assistant.
The T2 features 7 x 1 day programming as well as Eco and Manual modes. T2 will
operate your Herschel heater(s) by turning them ON if the room temperature is
lower than the desired temperature and will turn them OFF once the desired
temperature is reached or exceeded.
The R2 is the switch that turns your heaters on and off and must be wired to the
heaters and mains power. The R2 also acts as the internet gateway for your T2,
enabling you to control the system with the SmartLife App.
Each R2 can handle up to 10 amps, so you will need sufficient R2 units to control the
overall heating load. If you are in any doubt regarding calculation of heating loads,
please consult a qualified electrician. Each R2 must be paired to a T2 to operate
correctly. Pairing steps can be found in the instructions for the T2. On its own, the
R2 provides only a
limited Boost
function and has no temperature control
capability.
This appliance is rated IP20 and must be installed outside of the splash zones in
bathrooms.
Please read these instructions carefully all the way through before installing &
operating. Keep in a safe place.
