T2 Wireless thermostat
•
Turn off the T2.
•
Press MENU and UP
button together for 6
seconds. This brings
up
each
available
parameter in turn as
shown in the table.
Menu
Description
Range
Default
01
Temp. calibration
-8
℃
/ +8
℃
0
℃
02
Open Window
0:Off 1:On
1
03
Adaptive start
0:Off 1:On
On
04
Software info.
-
-
05
Software info.
-
-
Failsafe Mode
If the R2 loses connection with the wifi, it is still controllable locally via the T2. (The Red
LED 1 will flash slowly while the wifi signal is lost).
If the R2 loses connection with the T2 it remains in its current setting. (The Red LED 1
will flash slowly while the RF signal is lost).
2 Year Warranty
infrared.com/customer-service/warranty-registration/ or via the QR
code.
Within two years from date of purchase Herschel will repair or replace
the T2 / R2 where the fault is due to defects in materials or
workmanship. This warranty is for standard domestic use only and
excludes commercial uses. In the event of a warranty claim please visit
the Customer Service area of the Herschel Website and follow the
Warranty Claim process. You will need proof of purchase.
Note your serial number here for future reference.
A prerequisite for validity of the warranty is use at the specified supply voltage of the thermostat and
use in accordance with the conditions specified in this manual. Any further warranty or claims are
excluded.
The warranty covers the repair of replacement of the defective product only and Herschel shall have
no liability for installation costs or consequential loses however incurred. The decision to repair or
replace will rest solely with Herschel and any replacement will be as close as possible in specification
to the failed unit.
Removing the serial number will void the warranty. The warranty will also be void if the unit has been
tampered with in any way.
The product rating label must be left on the unit. Herschel Infrared Ltd will assume no responsibility
for scratches on the thermostat display or case after first use.
How change Parameter Settings:
Each parameter is changed by pressing the Up or Down button and the next parameter
selected by pressing MENU.
