1. Your Product
Storage box for assembled stars from 40 cm up to 70cm dia-
meter (Ø 16 to 28 inch). Suitable for star models I4 / A4;
I6 or I7 / A7.
Assembly Instruction for the storage box
2. contEnts of thIs sEt
1.
Please start with unfolding the storage box and then
gluing it together.
3. AssEMblY InstructIon
2.
Now stick the 4 punch-out cards together (marked with
“Unterteil 1” until “Unterteil 4”), fitting them into one
another using the slots (See picture)
3.
Stick the finished lower card cross in the storage box and
put the assembled star into it. The opening for the bulb of
the star should be at the top.
- 1 storage box
- 4 punch-out cards, suitable to assemble the upper card
cross marked with “Oberteil 1” until “Oberteil 4”
(„top-piece 1 - 4“)
- 4 punch-out cards, suitable to assemble the lower card
cross marked with “Unterteil 1” until “Unterteil 4”
„bottom-piece 1-4“)
4.
Now stick the 4 punch-out cards together (marked with
„Oberteil 1“ until „Oberteil 4“), fitting them into one another
using the slots (See picture) To hold and secure the star in
the storage box place the assembled upper card cross onto it.
5.
Then seal the storage box and store it in a dry place.
© Herrnhuter Sterne GmbH, Subject to change 05/2013
Herrnhuter Sterne GmbH
Oderwitzer Straße 8 . 02747 Herrnhut
Tel. +49-35873 3640 . Fax +49-35873 36435