Accessories
dipperLog Maintenance Kit
To help get the most out of your Heron dipperLog,
purchase the dipperLog Maintenance Kit (PN# 5024)
to keep your dipperLogs accurate and performing at
their peak for many years. The maintenance kit
consists of:
1. 5x packs of Alconox® Powdered Precision Cleaner
2. 25x Replacement O-Rings
3. O-Ring Applicator Guide & Pick
4. Cleaning Cloth
5. Rubber Gloves
tapNtell
The tapNtell (PN# 5020) is a surface mount weather
resistant display accessory for the dipperLog well
head readout version. The connector end of the
tapNtell is attached to the direct read well head and
the surface mount display unit can be attached to the
side of the casing, fence or pump house (any solid
surface). The tapNtell provides an instant real time
reading of water level and temperature with a tap of a
finger.
SDI-12
The SDI-12 (PN# 5021) system enables the dipperLog
data to be accessed from remote locations by a central
computer base without site visits. The sensors can be
interchanged without reprogramming the data recorder
with calibration or other information. The power is supplied
to the sensors through a third party device that enables
telemetric data readings.
Operating Voltage (DC) :: 7.5 – 35 VDC
Supply Current (Stand-by) :: 10µA
Supply Current (Active) :: 1.5mA
Accessory Case
The Heron Accessory Case (PN# 2054) comes with
soft padding on the inside to protect your equipment/
accessories.
Approximately:
Width:
30cm (12”)
Length:
30cm (12”)
Height:
8cm (3”)
di Series User/Software Manual
13
www.heroninstruments.com
905-628-4999