•
Do not attempt to correct the encoder teeth
by bending manually or by using any other
mode.
•
Don't apply the hard braking in wet or rainy
conditions and while taking a turn.
•
Do not adjust the wheel speed sensor air
gap yourself.
•
Do not insert any metallic part near wheel
speed sensor.
Don't's
•
Don't use the non-genuine spares like pads,
discs, tyres etc.
•
Don't try to service HECU or open to
separate the parts.
•
Don't panic by mechanical noises or slight
pedal pulses while applying the brake in
vehicle. These conditions are normal and
indicates that ABS is working.
PARKING
After stopping the vehicle, shift the
transmission
to neutral, turn the fuel valve
“OFF” ( ), turn the ignition switch “OFF”
( ), park the
vehicle
on main stand, lock the
steering and remove the key.
CAUTION
!
!
•
Park the vehicle on firm level ground to
prevent overturning.
•
While parking on side stand engage the first
gear.
The tool kit (1)
is located
under
the seat.
Some emergency repairs, minor adjustment
and parts replacement can be performed with
the tools contained in the kit.
Ÿ
Tool bag
TOOL KIT
Kit consists of following tool:
Ÿ
+ , -Driver No.2
Ÿ
Grip
Ÿ
Box wrench P16 x 14
Ÿ
Pin spanner
Ÿ
No.3 cross point screw driver
Ÿ
Handle pin spanner
(1) Tool kit
37
1
Summary of Contents for MotoCorp XPULSE 200T
Page 4: ......
