HERO MAESTRO EDGE 125 PROGRAMMED FI Manual Download Page 53

Page: 53 / 84

detergent and water. Rub the soiled area

gently rinsing it frequently with fresh water.

•

Take care to keep brake fluid or chemical

solvents off the vehicle. They will damage

the plastic and painted surfaces.

•

The inside of the headlamp lens may be

clouded immediately after washing the

vehicle. Moisture condensation inside the

headlamp lens will disappear gradually by

lighting the headlamp in high beam.

NOTE

•

After cleaning, rinse the vehicle

thoroughly with plenty of clean water.

Strong detergent residue can corrode alloy

parts.

•

Dry the vehicle with pressurized air, start

the engine and let it run for several minutes.

•

Braking efficiency may be temporarily

impaired immediately after washing the

vehicle.

Anticipate longer stopping distance to avoid a

possible accident.

•

Test the brakes before riding the vehicle.

Several applications may be necessary to

restore normal braking performance.

TEST BRAKES

SEAT

OPEN

LOCK

PUSH

FULL

OPEN

PASS

TRIP

ODO

888.8

888888

km /h

Summary of Contents for MAESTRO EDGE 125 PROGRAMMED FI





















































































Search results

Summary of Contents for MAESTRO EDGE 125 PROGRAMMED FI

Reviews:

Related manuals for MAESTRO EDGE 125 PROGRAMMED FI

Brands by name

Popular brands

HERO MAESTRO EDGE 125 PROGRAMMED FI, Manual

Search results

Summary of Contents for MAESTRO EDGE 125 PROGRAMMED FI

Reviews:

Related manuals for MAESTRO EDGE 125 PROGRAMMED FI

Brands by name

Popular brands