Herni
V. Using the optional accessories
5.1 ISOFIX-adapter
Installation:
1. Let the installation of the seat and its adjustment been demonstrated to you by the
technician.
2. Open the setscrews on the left and right and pull
the bracket out to the rear.
3. Adjust the back rest of the car's seat to the required angle,
taking advantage of the space created to the car's back
pad. Slide the ISOFIX adapter on both sides backwards in
the direction of the backrest until you hear the locking of
the two ISOFIX tongues in the vehicle's ISOFIX
mounting (two clicks).
4. Push the car seat towards the backrest of the vehicle until
both touch and are slightly under tension. This prevents
vibrations while driving.
5. Close the two setscrews left and right. In addition,
the two ISOFIX tongues must be protected against
unattempt opening, which is why both screws
must be tightened.
6. Ensure that both ISOFIX tongues are engaged by a
double-sided pulling test.
Removal Note:
1. Open the two screws .
2. Move them forwards in the direction of the car seat,
releasing the grid connection of the system. It may
be necessary to compensate for the pressure of the
seats padding so that the connection can be solved.
3. The car seat can now be removed from the vehicle.
• Page 12 •
