Herni
IV. Installation of the XL-Kit
• The XL-Kit allows you to use the STARLIGHT-
NXT even for older children (1.20 m max.). If
the car seat has not already been ordered
with the XL kit, it can be retrofitted with it.
The XL-Kit consists of:
backrest cushion long, incl. headrest
beltpads for the shoulder, pair
adapter plate (if thorax supports are used)
wedge-shaped pad, long
• First remove the already installed back
cushion, incl. the wedge-shaped compensati-
on cushion.
• Loosen the straps as far as possible and
remove the gray straps from the Y-connector
(fig. 2)
• Press the release button (Fig. 3) and pull the Y-
connector on the back of the car seat up as far
as it will go - until the gray 25 mm strap stops
and is visible only a few inches.
• Page 9 •
Fig. 2
Fig. 1 (components)
Fig. 3
