Herni
III. Handling and functions of the basic seat
3.1 Adjusting the internal 5-point-belt
First extend the straps by simultaneously
pressing the grey button on the belt adjuster
and pulling on the straps. Now put the straps
over the child‘s shoulders.
Then insert the two metal tongues into the belt
buckle until they click into place. Then tighten
the belt system by pulling on the left and right
end of the strap until a stable sitting position
has been found.
If you want to take the child out of the car seat,
first loosen the belt by pressing the grey button
on the belt adjuster and pulling the straps.
Then the belt buckle can be opened with a
firm push on the red round button.
3.2 Positioning of side supports
As standard, the IPAI-LGT is equipped with a pair
of anatomically shaped thorax pads . This can
support children with poor upper body control
in their posture.
Loosen the thorax pads by pulling gently until
the Velcro connection is released. Since the
inside of the side back guidance was covered
with Velcro elements, a suitable position can
now be found completely freely by fixing it
again with Velcro.
• Page 10 •
