1.8 Installation in the car - with ISOFIX
The IPAI-LGT will be installed tightly with the
ISOFIX-locking arms (05) in your car. Your child
will then be buckled up with the vehicle‘s 3-
point belt.
1. If your vehicle is not equipped with ISOFIX
insertion aids as standard, clamp the two
insertion aids (02), which are included in the
delivery of the seat, with the cutout facing
upwards, onto the two ISOFIX fastening
points (01) of your vehicle.
TIP!
Die ISOFIX fixation points are located
between the seat and the back of the vehicle
seat.
2. Move the vehicle seat headrest to it‘s
uppermost position.
3. Keep pushing the ISOFIX setting button (08)
and slide the ISOFIX locking arms (05) fully
out.
4. Press the green safety button (07) and the
red release button (06) against each other
on both sides of the seat. This ensures that
both hooks on the ISOFIX locking arms (05)
are open and ready for use.
5. Place the child seat in the direction of travel
on a vehicle seat approved for use. Make
sure that the backrest (12) lies flat against
the backrest of the vehicle seat.
6. Position the two ISOFIX locking arms (05)
directly in front of the two insertion aids (02).
Herni
I. General information
• Page 5 •
