For more detail information, please check out www.hernest.com
It will be our pleasure to have your visit.
2) Set the thermostatic mixer temperature above 40
℃
, but still no hot water
：
a.the temperature of hot water supply does not reach above 55
℃
, solution: increase the temperature of hot water
source to ensure to meet the constant temperature conditions
.
b.the water pressure of hot water supply fails to reach the constant temperature condition (the water pressure is not
enough, which is commonly used by solar rooftop users or high-rise households)
Solution: for users with normal water pressure of cold water supply, it is recommended to replace the solar water
heater with other water storage water heaters, and if the water pressure cannot meet the requirements of constant
temperature mixer, it is suggested to add booster pump. The hot water temperature of the water heater is generally
higher than 100
℃
, and the hot water temperature exceeds the limit temperature of the thermostatic mixer (The hot
water temperature of the thermostatic faucet is between 55
℃
- 85
℃
), so that the thermostatic mixer cannot work
normally.
The gas water heater is not on fire or stops for a while:the water temperature is fluctuated. The main reason is that
the water heater sets a default value to meet its own requirements, so the water flow and temperature are not
enough.
Solution: adjust the default value of the gas water heater factory setting to the conditions required by the thermo
-
static mixer water temperature can be used.
The electric water heater with the outlet water temperature of the thermostatic mixer is low. the main reason is that
the temperature of the heater is generally set at about 50
℃
when it leaves the factory, so the hot water for the
thermostatic mixer will be low, solution: reset the hot water outlet temperature of the heater, and it is recommended
to set it at about 60
℃
.
There is water dripping at any interface of the faucet. Solution: tighten it slightly with tools at the interface or after
wrapping the raw material belt at the thread.
Is there water dripping between shower head and hand shower?
Solution: the right water separator end of the thermostatic faucet is not closed properly. Try to close it to solve this
problem.
Tip: constant temperature shower is the perfect match with electric water heater and air energy water heater.
After-Sale Service
If you have any issues with the product, please feel free to contact us online or by phone for customer service.
Phone No.: (909) 430-1666
Service E-mail: [email protected]
www.hernest.com
5
