Nook Table
Assembly Instructions
1BSSGT
rev
B
4
Disassembly for Recycling:
Materials Identification and Segregation:
Where possible, plastic components are marked with ASTM recycling
codes. Use these codes to identify material type for recycling. Non
marked components should be treated as mixed plastic. Ferrous metals
can be identified using a small magnet for recycling. Non-ferrous metals
should be separated and recycled separately. To disassemble product,
reverse the above installation steps
Illustrations and specifications are based on the latest product information
available at the time of publication.
The right is reserved to make changes in design and specifications at any
time, without notice, and also to discontinue products.
For more information about our products and services or to see a list of
dealers, for assistance:
please visit us at www.hermanmiller.com or call 888-443-4357.
©2020 Herman Miller, Inc., Zeeland, Michigan Printed in U.S.A. Part No.
1BSSGT – B
Notice:
Some of the parts have been wrapped to protect them during shipping.
Remove the plastic wrap before assembling the product.
Step 9:
9.1 Position magnetic buttons to space out the Nook tables
approximately 1” from each other. Do NOT force the Nooks together.
The result of stressing the metal screens around the spacers could
cause an undesirable wave condition in the screen. Align the two
nooks to each other so the spacers just gently brush up against the
opposing screen.
Illustrations and specifications are based on the latest product information
available at the time of publication.
The right is reserved to make changes in design and specifications at any
time, without notice, and also to discontinue products.
For more information about our products and services or to see a list of
dealers, for assistance:
please visit us at www.hermanmiller.com or call 888-443-4357.
©2020 Herman Miller, Inc., Zeeland, Michigan Printed in U.S.A. Part No.
1BSSGT – A
Notice:
Some of the parts have been wrapped to protect them during shipping.
Remove the plastic wrap before assembling the product.
