manualshive.com logo in svg

HermanMiller Nook Table, Manual

Share
Download
HermanMiller Nook Table Manual Download Page 1

Parts Included

HermanMiller

Nook Table

How to install Nook Table

Main Panel

Work Surface

Step 2: (For castor option only)

2.1Insert castor stem into bottom of leg until fully seated.

Step 1:

1.1 Attach the top plate to the leg. Use Allen key to secure two M8 

flat head machine screws, to attach the plate.

Tools Required

Allen Key

Power Driver

Leg

Plate

Liner

Tapping 

Screw

M8 Flat Head 

Screw

Castor (Optional)

 Round-out for all legs on the Nook table.

Phillips Bit

Return Panel

Trim

Barrel Screw

M8 Machine 

screw and 

Nut

Note:

 Tighten fasteners until snug plus ½ turn.

#10 Pan 

Head Screw

Clip

Dampener

Nook Table

Assembly Instructions

1BSSGT

 rev 

B

1

Summary of Contents for Nook Table

Page 1: ... leg Use Allen key to secure two M8 flat head machine screws to attach the plate Tools Required Allen Key Power Driver Leg Plate Liner Tapping Screw M8 Flat Head Screw Castor Optional Round out for all legs on the Nook table Phillips Bit Return Panel Trim Barrel Screw M8 Machine screw and Nut Note Tighten fasteners until snug plus turn 10 Pan Head Screw Clip Dampener Nook Table Assembly Instructio...

Page 2: ...own Step 4 4 1 Install the metal screen Main panel to the work surface A Locate main panel with the two pilot holes B Fasten the remaining screws Step 5 5 1 Install the return panel Right Side to the work surface using the pan head screws A Locate return panels with the two pilot holes B Fasten the remaining screws NOTE The Side liners and dampeners should be installed prior to attaching the retur...

Page 3: ...stall the trim piece from the top and push it down over the plastic clips 8 2 8 1 Step 8 8 1 Peel the backer o of the dampener and stick it to the return panel Use the end bracket to roughly align the dampener as shown below Repeat for other panel 8 2 Liners are magnetic on the back Align the liner so that the top edge of the liner is sub flush to the metal screen by approximately 2mm Note Locate ...

Page 4: ...d Michigan Printed in U S A Part No 1BSSGT B Notice Some of the parts have been wrapped to protect them during shipping Remove the plastic wrap before assembling the product Step 9 9 1 Position magnetic buttons to space out the Nook tables approximately 1 from each other Do NOT force the Nooks together The result of stressing the metal screens around the spacers could cause an undesirable wave con...

Reviews:

No comments

Brands by name

Popular brands

Load more brands