Z
© 2016 Herman Miller, Inc. Zeeland, Michigan. Printed in the U.S.A.
Part no. 1BG02M rev B.
TM
Y
,
L
, Canvas are among the trademarks of Herman Miller, Inc.
Illustrations and specifications are based on the latest product information available at the time of publication.
The right is reserved to make changes in design and specifications at any time, without notice, and also to discontinue products.
11
For installing screen using stud:
1. Use End Bracket (S) to identify where to mark for pilot holes. Position End
Bracket (S) tight against back edge of work surface. Align side edge of End
Bracket with inside edge of edge banding on side of work surface. Mark
position of holes.
S
4. Place assembly at desired location with back of bracket against back of
work surface. Mark hole locations. Move assembly to side. Drill pilot hole.
Be carefull not to drill through work surface.
5. Return assembly to location. Secure bracket assembly to work surface with 2
truss head screws (AE).
NOTE: Wire manager may need to be repositioned to fascilitate installation.
6. Slide screen (N) onto bayonets.
AE
