Z
© 2019 Herman Miller, Inc. Zeeland, Michigan. Printed in the U.S.A.
TM
Y
,
L
, Everywhere Tables are among the trademarks of Herman Miller, Inc.
Illustrations and specifications are based on the latest product information available at the time of publication.
The right is reserved to make changes in design and specifications at any time, without notice, and also to discontinue products.
8
Part no. 1b6k0d rev G
Adjustable Leg Installation:
B
F
A
B
E
E
D
A
F
“T” Leg
“C” Leg
1. Secure leg segments together with connecting bracket (D) and 2 Hex Flange
tapping screws (E) (per leg assembly).
2. Position Leg Assembly at each end on bottom side of Work Surface (A) so
that Foot Assembly is centered on depth of Work Surface.
3. Install Pan head tapping screws (16) per leg assembly. Exception painted
MDF tops. Use machine screw(G) and star washer (H) in locations where
insert is present in the hole pattern.
Foot Assembly
Foot Assembly
4. To Adjust work surface height, support work surface then push
down on button on Legs.
5. Raise or lower work surface to desired height.
Button
Leg
E
E
D
Assembly Instructions:
