Z
© 2019 Herman Miller, Inc. Zeeland, Michigan. Printed in the U.S.A.
TM
Y
,
L
, Everywhere Tables are among the trademarks of Herman Miller, Inc.
Illustrations and specifications are based on the latest product information available at the time of publication.
The right is reserved to make changes in design and specifications at any time, without notice, and also to discontinue products.
5
Part no. 1b6k0d rev G
B or C
1. Hold Leg segments (B or C) at 15 degree angle to one another.
2. Insert Hooks on base of leg segments into notches in adjoining leg segments.
3. Secure Leg segments together with Connection Bracket (D) and 2 Hex
Flange Tapping Screws (E). (Per Leg) Do not overtighten.
Notch
Hook
E
D
E
B or C
4. Position Leg Assembly at each end on bottom side of Work Surface (A) so
that Foot Assembly is centered on depth of Work Surface.
5. Install Pan head tapping screws (F) 16 per Leg Assembly. Exception on
painted MDF tops, use machine screw (G) and star washer (H) in locations
where insert is present in the hole pattern.
“T” Leg
“C” Leg
F
A
A
F
Foot Assembly
Foot Assembly
Assembly Instructions:
