Z
© 2019 Herman Miller, Inc. Zeeland, Michigan. Printed in the U.S.A.
TM
Y
,
L
, Everywhere Tables are among the trademarks of Herman Miller, Inc.
Illustrations and specifications are based on the latest product information available at the time of publication.
The right is reserved to make changes in design and specifications at any time, without notice, and also to discontinue products.
22
Part no. 1b6k0d rev G
3. Position Leg Assembly onto bottom side of Work Surface(A)
4. Install 24 Pan Head Tapping Screws(E) per leg assembly.
5. Position Y Brace(D) onto Leg Assemblies.
6. Install 3 Hex Flange Screws(F) per Leg Assembly. Do not overtighten.
7. When in use position, ensure all 8 glides are in contact with the floor.
B
E
D
C
1. Hold Leg segments(B) at 15 degree angle.
2. Interlock Leg Bases onto Base Connector(C).
B
B
F
Assembly Instructions:
