hergom E-30 XS, Use And Maintenance Instructions

Page: 10 / 20

Painted parts
Clean with a dry cloth to avoid rust.
Chimney and connecting unit
Read the chapter in the Manual for Installers that refers to this topic.
DOOR PANES
Cleaning
Fireplace window cleaning liquids are quite effective products.
Never try to clean the glass while the fireplace is working.
We recommend using HERGOM window cleaning products for their proven efficacy.
If the glass pane on the fireplace door is constantly covered in soot, this means your fire is
“poor”
and that the connecting pipe and chimney are being blocked by soot and creosote.
Replacing.
The glass panes in your heater have been especially manufactured for log stoves.
If they should break, they must be replaced by another glass pane with the same technical
specifications. Contact our Distributor to provide you with the appropriate glass pane, together
with instructions to assemble and seal.
MAINTENANCE PRODUCTS
Industrias HERGÓM, S.A. places a range of products for the preservation of your heater and
chimney at your disposal: heat resistant paint, refractory putty, anti-soot products, fire-lighters,
glass cleaning products.
7 - SAFETY
WARNING!
Gas/log/pellet units get hot when in use. Consequently,
owners must act with precaution and keep at a
distance. Especially keep children,
the elderly and other people who require special
supervision, as well as pets, away from the fireplace
when it is in use.
Make sure that children or other people who are not
familiar with how the device works are supervised by
responsible people when they are near the fireplace.
In order to prevent burns or children or other people
from coming near the appliance, use a fire grille or
screen.
A number of possible risks are present when operating your solid fuel oven with fuel of any brand.
The said risks can be minimised if the instructions and recommendations included in this manual
are followed.
•
When installing the stove, observe the necessary safety distances for the oven and
chimney from combustible surfaces (wooden or papered walls, wooden floors...). Safety distances
must be respected when the lining on walls or nearby areas may be damaged or deformed
by temperature (varnish, paint, PVC...). Fig. 6
•
The base where you are going to install your heater must be flat and provide a perfect
seat. The said base must also be capable of supporting the weight of the heater. The base must
be built using heat resistant materials.
•
All the area around the heater should must be heat resistant. If not, they must be protected by
fire-proof material.
•
Ash should be emptied into a metal container and immediately removed from the house.
• Do not use flammable liquids to light the stove.
Keep any type of flammable liquid (petrol, gasoline, alcohol,....) at a distance from the fireplace.
•
Never use coal or fuels that are not recommended for the operation of this
250
FIG.7