MY22H03 - 32_1.0_04.10.2021
70
Operation
6.3.2
On-board computer warnings
Figure 59: Example: Warning W000
Code
Cause
Limitation
Remedy
W101
(W011)
No vehicle speed signal was
detected by the speed
sensor.
The maximum speed at which
assistance is provided is lower
than normal.
Contact your specialist dealer.
W103
(W013)
Normal sensor initialisation
could not be completed.
The drive will be lower than
normal.
1
Turn the cranks backwards two or three times.
2
If the problem persists, contact your specialist dealer.
W104
The power was switched off
because a power loss was
detected in the system.
No assistance provided when
cycling.
Contact your specialist dealer.
W105
Unexpected power cut-out
detected.
The motor assistance functions
are not restricted during display.
1
Re-start the system.
2
If the problem persists, contact your specialist dealer.
W200
(W020)
The power was switched off
because the temperature
exceeded the guaranteed
operating range.
System functions do not start.
1
If the battery overheats, store in a cool place where
there is no direct sunlight until the battery interior
temperature has fallen sufficiently.
2
If the battery has been exposed to excessive cooling,
store in a warm room. Monitor and wait until the
battery temperature has risen sufficiently.
W302
(W032)
The fitted gear shift is
different to the one configured
in the system.
No shifting is possible.
Contact your specialist dealer.
Table 26: List of warnings
