MY22H03 - 32_1.0_04.10.2021
181
Maintenance
5
Use a 3 mm hex spanner to screw the valve lid
back on and tighten with a maximum of 0.5 Nm.
Figure 185: Fastening the cartridge valve lid
Setting the slipper clutch
1
Use 3 mm hex spanner to unscrew valve cap.
Figure 186: Unscrewing the valve cap
2
Secure the mounting interface against twisting
with a 24 mm open-end spanner.
Figure 187: Securing against twisting
3
Set the torque to 18 Nm with a torque wrench
and a 6 mm hex bit with a shaft length of at
least 25 mm. Rotate clockwise.
.
Figure 188: Setting in a clockwise direction
4
Use a 3 mm hex spanner to screw the valve lid
on and tighten with a maximum of 0.5 Nm.
Figure 189: Fastening the cartridge valve lid
Notice
The cartridge is not airtight without the valve
lid.
Notice
The cartridge is not airtight without the valve
lid.
