Hercules LT0892, Instruction Manual

Page: 3 / 17

nearer to the stacking area, then turn the winch to tilt the fork,
overturn the material to the stacking area or on the stacking goods,
without unloading by man, which is safe and free of labor.
3.3 Because the capacity of load is not big, the height of stacking is not
high, the operating force of winch is not big when tilting.
4 Safety rules
4.1 Optimum safety
4.1.1 Use the correct operation, the operator should stand after the
control level whenever push/pull or ascend/lower.
4.1.2 When using the lateral tilting function, the operator should stand
the reverse side of the stacking area to operate the winch. Pay
attention to the direction of operating the winch, which can not
be wrong, or so may result in death or damage of material.
4.1.3 Avoid overloads
Note: the center distance of load and load is inverse ratio, that is
the load center is nearer to the heel of the fork, the load is bigger,
while the center distance is farther, the load is smaller. (Dia.1)
Please obey this regulation strictly, never exceed the regulation of
this diagram, because the weight and center of the load influence
the intensity of the fork, if it is overloaded there is a risk of
bending.
Diagram
Dia.1
2