background image

A 12 month manufacturing warranty applies to the original purchaser for manufacturing defects of this product 

for a period of 12 months from the original purchase date. This warranty is not transferable. In order to make a 

warranty claim you must contact 4WD Supacentre at your local 4WD Supacentre store or on 1800 88 39 64. 

Alternatively you can mail us at our head office at 2 Stanley Street Silverwater NSW 2128 Australia. You must 

produce your sales receipt of purchase and fill out a claim form. You may be required to sign a statutory 

declaration in relation to the claim. We will require the product to be returned to us before we will assess a claim. 

We will not pay for the product to be returned to us but will pay for the delivery of a repaired or replacement 

product to you. If your claim is accepted we will repair, replace or refund the product at our discretion.

This warranty does not include damage caused by mould, insects, animals, children, misuse, negligent use, 

incorrect fitting of a product, incorrect set up or down when instructions are included, weather, accidents, 

abuse, improper installation or operation, damage caused by storage, lack of reasonable care, unauthorized 

modification, loss of parts, tampering or attempted repair, fading or discolouration of the product caused by 

excessive exposure to sunlight or normal wear and tear.

This warranty does not include any product that has been used for anything other than domestic use.

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled 

to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss 

or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable 

quality and the failure does not amount to a major failure.

OUTDOOR SUPACENTRE PTY LTD 

2 Stanley St Silverwater NSW, 2128

PHONE: 1800 88 39 64

OUTDOOR SUPACENTRE WARRANTIES

Summary of Contents for HCRG-JACK48









Reviews: