Hercules H-SB 801 E, Original Operating Instructions

Page: 24 / 240

GBR
- 24 -
2.2 Items supplied
Please check that the article is complete as spe-
ci fi ed in the scope of delivery. If parts are missing,
please contact our service center or the nearest
branch of the DIY store where you made your
purchase at the latest within 5 work days after
purchasing the article and upon presentation of
a valid bill of purchase. Also, refer to the warranty
table in the warranty provisions at the end of the
operating instructions.
•
Open the packaging and take out the equip-
ment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
available).
•
Check to see if all items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, please keep the packaging until
the end of the guarantee period.
Important!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or su ff ocating!
•
Original operating instructions
•
Safety instructions
•
Pillar drill
•
Drill chuck
•
Folding chip guard
•
Stop
3. Proper use
This pillar drill is designed for drilling metal, plas-
tic, wood and similar materials. It is intended for
use in the private sector only.
Food and harmful materials may not be pro-
cessed with the machine. The drill chuck is only
designed for use with drill bits and tools with a
shaft diameter of 1,5 to 16 mm, and for cylindri-
cal tool shanks. Tools with a tapered shank can
also be used. The machine is intended for use by
adults only.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
4. Technical data
Nominal input voltage .....................230V ~ 50 Hz
Power rating ............................................... 550 W
Motor speed......................................... 1,400 rpm
Output speed (in
fi nitely adjustable) .....................
.................................................... 450 - 2,500 rpm
Drill chuck mount .......................................... B 16
Spindle taper ...............................................MK 2
Scroll chuck ...................................Ø 1,5 - 16 mm
Reach ..................................................... 160 mm
Dimensions of drill table .................240 x 240 mm
Angle adjustment of table ................ 45° / 0° / 45°
Drill depth ................................................. 80 mm
Pillar diameter ........................................... 65 mm
Height ..................................................... 940 mm
Base area ......................................450 x 300 mm
Weight..........................................................43 kg
Laser class......................................................... 2
Wavelength of laser ................................. 650 nm
Laser output .............................................
≤ 1 mW
Sound and vibration
Sound and vibration values were measured in
accordance with EN 60745.
Operation Idle speed
Sound pressure level Lp
A
69.2 dB(A) 65.5 dB(A)
Sound power level LW
A
78.6 dB(A) 76.4 dB(A)
Wear ear-mu ff s.
The impact of noise can cause damage to hea-
ring.
Total vibration values (vector sum of three direc-
tions) determined in accordance with EN 61029.
Handle
Vibration emission value a
h
≤ 2.5 m/s
2
K uncertainty = 1.5 m/s
2
Anl_H_SB_801_E_SPK7.indb 24 Anl_H_SB_801_E_SPK7.indb 24 07.09.12 08:31 07.09.12 08:31