GBR
- 18 -
6.5 Blowing
Connect the suction hose (11) to the blow con-
nector (10) on the wet and dry vacuum cleaner.
7. Cleaning, maintenance and
ordering of spare parts
Always pull out the mains power plug before star-
ting any cleaning work.
7.1 Cleaning
•
Keep all safety devices, air vents and the
motor housing free of dirt and dust as far as
possible.
•
We recommend that you clean the equipment
immediately after you use it.
7.2 Cleaning the equipment head (3)
Clean the equipment regularly with a damp cloth
and some soft soap. Do not use cleaning agents
or solvents; these may be aggressive to the plas-
tic parts in the equipment.
7.3 Cleaning the tank (8)
The tank can be cleaned with a damp cloth and
some soft soap or under running water, depen-
ding on the amount of dirt.
7.4 Cleaning the
fi
lters
Cleaning the pleated
fi
lter (15)
Clean the pleated
fi
lter (15) regularly by carefully
patting it and cleaning it with a
fi
ne brush or hand
brush.
Cleaning the foam
fi
lter (16)
Clean the foam
fi
lter (16) with a little soft soap un-
der running water and allow it to air-dry.
7.5 Maintenance
At regular intervals and before each use, check
that the
fi
lters in the wet and dry vacuum cleaner
are securely
fi
tted.
7.6 Ordering replacement parts:
Please quote the following data when ordering
replacement parts:
•
Type of machine
•
Article number of the machine
•
Identification number of the machine
•
Replacement part number of the part required
For our latest prices and information please go to
www.isc-gmbh.info
8. Disposal and recycling
The equipment is supplied in packaging to pre-
vent it from being damaged in transit. The raw
materials in this packaging can be reused or
recycled. The equipment and its accessories are
made of various types of material, such as metal
and plastic. Never place defective equipment in
your household refuse. The equipment should
be taken to a suitable collection center for proper
disposal. If you do not know the whereabouts of
such a collection point, you should ask in your
local council o
ffi
ces.
9. Storage
Store the equipment and accessories out of
children’s reach in a dark and dry place at above
freezing temperature. The ideal storage tempe-
rature is between 5 and 30 °C. Store the electric
tool in its original packaging.
Anl_H_SA_1930_SPK7.indb 18
Anl_H_SA_1930_SPK7.indb 18
29.01.13 17:38
29.01.13 17:38
Summary of Contents for H-SA 1930
Page 11: ...DEU 11 Anl_H_SA_1930_SPK7 indb 11 Anl_H_SA_1930_SPK7 indb 11 29 01 13 17 38 29 01 13 17 38...
Page 174: ...174 Anl_H_SA_1930_SPK7 indb 174 Anl_H_SA_1930_SPK7 indb 174 29 01 13 17 39 29 01 13 17 39...
Page 175: ...175 Anl_H_SA_1930_SPK7 indb 175 Anl_H_SA_1930_SPK7 indb 175 29 01 13 17 39 29 01 13 17 39...
