Hercules ePlug 200 C
Hercules ePlug 200 Multi
28/75 – User Manual
3.4.
Adding one or more adapters to your Hercules ePlug
Station monitoring list
You may wish to add a third and fourth adapter to extend your PLC network to other rooms in your home. In
order for them to appear in Hercules ePlug Station, you must enter their information (room, MAC address).
- In the
General
tab, click
Add a device
.
- Unplug the PLC adapter that you wish to add to the monitoring list, and make a note of its MAC address.
Next, enter the MAC address in the corresponding field and select (in the drop-down list) the room in which
the PLC adapter in question is set up.
- Click
Add
and repeat this procedure for all of the other adapters that you wish to add.
- Click
when you're done.
- Plug the adapter into an electrical outlet in the room you have indicated.
- Click
.
- Connect the adapter according to the instructions displayed onscreen.
- Click
.
- Click
Close
.
The new adapter appears in the general configuration display for your PLC network.
