034-11461_1.0_29.01.2018
35
Transportation, storage and assembly
5.3.2
Scope of delivery
The bicycle was completely assembled in the factory
for test purposes and then dismantled for
transportation.
The scope of delivery includes:
• the bicycle, 98% pre-assembled,
• the front wheel,
• the pedals and
• the operating instructions.
5.3.3
Commissioning
Given that initial commissioning of the bicycle requires
special tools and specialist knowledge, it must be
performed by trained specialist staff only.
Experience has shown that a bicycle which has not yet
been sold, is spontaneously handed to consumers as
soon as it appears ready to ride.
Every bicycle must be prepared so that it is in fully
usable condition immediately after being set up.
Initial commissioning includes the following work:
Install the
wheels
and the
pedals
.
Move the
handlebars
and
saddle
into the functional
position.
Check all the components to make sure that they
are firmly in place.
Check all the settings and the tightening torque of
the axle nuts.
Axle nut tightening torque
35 Nm - 40 Nm
