Heras sGate Trackless, User Manual

Page: 8 / 66

EN – Translation of the original user manual - 3.0 | 2018
8
1.7 GENERAL INFORMATION REGARDING THE ELECTRICAL CONNECTIONS
Electrical connections must be made compliant with the supplied wiring diagram.
It is important that the system is correctly earthed (Protective grounding in accord-
ance with DIN VDE).
Because EMC-related suppression components can leak current to the earth cable,
it is advisable that you do not protect the control unit with a Residual Current De-
vice. When switching on the system, a high starting current can be generated due
to the charging of the intermediate circuit.
If after measurement during commissioning it appears that the leakage current ex-
ceeds the permitted 3.5 mA, an additional grounding, in accordance with EN
60335-1 and IEC 30364-5-54, must be provided. Measurement is made according
to EN 60335-2-103. Consult your installer for this.
Take into account good shielding, for example an automatic circuit breaker 16A B
characteristic.
Ensure that the feeder cables are not carrying power during commissioning.
1.8 DELIVERY OF DRIVE UNIT
After installation and commissioning, by a Heras technician or a technician
trained by Heras, the cover of the drive unit must be closed. This is done to
prevent unauthorised access.
SAFETY 2
2.1 EXPLANATION OF THE SYMBOLS
Caution: To prevent personal injury, you must observe the safety in-
structions below.
Note: To prevent material damage, you must observe the safety in-
structions below.