Heras sGate Trackless, User Manual

Page: 18 / 66

EN – Translation of the original user manual - 3.0 | 2018
18
FAULTS 5
5.1 DEFECTIVE PHOTOCELL OR SAFETY EDGE
If a photocell or safety device is defective, the gate can only be opened and closed
using the hold-to-run switch. In this case, consult a qualified technician.
See chapter “SERVICE / MAINTENANCE”
EMERGENCY STOP 6
The gate is not equipped with an emergency stop system. According to the Machine
Directive 2006/42/EC, annex 1, article 1.2.4.3., this is not necessary if the emer-
gency stop system would not lower the risk. However, an emergency stop system
can be connected to the control unit.
Please refer to the instruction in the installa-
tion manual.
MAINTENANCE INSTRUCTIONS 7
•
When working on the gate or cleaning it, the power supply to the system
must be switched off and protected from unauthorized switching on.
•
If the gate must be moved manually, first turn the system circuit breaker in
the motor cabinet to the "off" position and protect it from being switched on
(e.g. by locking the cabinet).
7.1 GATE MAINTENANCE
To ensure optimal operation of the gate, maintenance must be performed by a
qualified technician at least once every 6 months or after a previously reached
number of cycles. When maintenance is not, or is incorrectly carried out, our user