7
8
9
2xM4x5/16"
Secure Torx
Countersunk
Head Screws
2,5 Nm
A
Inch
B
Inch
C
Inch
D
Inch
Weight
Lb
Luminaire Code
0.0011
LH5005.595
LH5004.595
LH5006.595
LH5007.595
2
11
/
64
1
1
/
16
55
/
64
1
37
/
64
T20
ASSEMBLY INSTRUCTIONS
English
To install the product on the handrail pipe;
1.
Installation of the products is suitable for Ø1 57/64"* 1/8" and Ø2 23/64" * 1/8" pipes.
Holes are aligned according to the dimensions given in the table.
2.
Holes that are given their diameters and dimensions are drilled accordingly. In order to
connect the product to the pipe, M4 * 1/32" threads are cut a screw in Ø1/8" mm holes..
3.
IP sockets that will ensure the energy transmission of the linear module are assembled
together. Cables are placed inside the pipe.
Note 1 : The socket for connecting the cables is not supplied with the product. Please provide
socket with minimum IP66 certification suitable for the product.
Note 2: The way how to assemble Ø1 57/64" and Ø2 23/64" are same. The important thing here
is to select the handrail pipe that is suitable with the product.
4.
During the mounting of the product onto the pipe, 2xM4 safety torque screws are used.
(Torque: 1,84 lb-ft)
5.
The view of the assembly of the Handra that provides Linear Lighing is given. The
product is ready to use.
6.
IP sockets that will ensure the energy transmission of the side module are assembled
together. Cables are placed inside the pipe.
Note 3 : The socket for connecting the cables is not supplied with the product. Please provide
socket with minimum IP66 certification suitable for the product.
Note 4: The way how to assemble Ø1 57/64" and Ø2 23/64" are same. The important thing
here is to select the handrail pipe that is suitable with the product.
7.
During the mounting of the product onto the pipe, 2xM4 safety torque screws are used.
(Torque: 1,84 lb-ft)
8.
The view of the assembly of the Handra that provides Side Lighting is given. The product
is ready to use.
9.
Serial connection cable diagram is given for the product.
Note5: Maximum line length is 22
9
'
WARNINGS AND REMARKS FOR INSTALLATION
AND MAINTENANCE
Safety Instructions
•
The light source contained in this luminaire shall only be replaced by the manufacturer or his
service agent or a similar qualified person. Always switch off the power prior to installation,
maintenance or repair activities.
•
The manufacturer is then discharged from liability when damage is caused by improper use or
installation.
•
•
If any luminaire is subsequently modified, the persons responsible for the modification shall be
considered as manufacturer.
To reduce the risk of death, personal injury or property damage from fire, electric shock, falling
parts, cuts, abrasions and other hazards, please read all warnings and instructions included
with the luminaire, on the luminaire’s packaging and affixed to the luminaire itself.
Installation
•
•
LEDs are high-quality electronic components! Please avoid contacting the light output opening
of the LED directly during installation or relamping.
IMPORTANT
To ensure secure connection, the luminaire housing must be positioned precisely in relation to
the mounting plate.
Cleaning And Maintenance
•
Clean luminaire regularly with solvent-free cleaners from dirt. Please do not do not clean the
luminaire with using high-pressure liquids.
