16/30
Warm Start
1
Set choke to the
OPEN position
4
Electric start (if so
equipped, 110V or
230V):
①connect extension
cord to start and plug
extension into 110V.
or 230V 3-wire,grounded outlet.
②press starter button on engine until
engine starts.
2
Insert ignition key.
DO NOT twist the
key after it is
inserted.
③remove the connect extension cord
from the grounded outlet.
NOTE:DO NOT operate starter more
than 15 seconds per minute, as
overheating and damage can occur.(If
engine does not start, refer to
TROUBLESHOOTINGin Care and
Maintenance) .
3 Pull recoil starter handle slowly
until you feel a definite resistance
(starter engaged)and then pull firmly to
start the engine.
5
Run idle for 20-30
seconds to warm it up.
6
Operate your
snowthrower.
WARNING! Allow the cable
to return slowly and in a
controlled manner each
time it is pulled!
Summary of Contents for HSX1420
Page 26: ...26 30 EXPLODED VIEW ...
Page 27: ...27 30 ...
