HENX H36DCG120A01, Original Instruction

Page: 28 / 33

Inspect the blade at a regular short interval for signs of damage. Do not continue
working with a damaged blade.
Re-sharpen the blade regularly (when it has dulled noticeably) and have it
balanced if necessary (performed by a qualified service technician).
BLADE THRUST
Exercise extreme caution when using the 3-teeth blade with this unit. Blade thrust
is the reaction that may occur when the spinning blade contacts anything it cannot
cut.
This contact may cause the blade to stop for an instant and suddenly
“thrust ”the unit away from the object that was hit. This reaction can be violent
enough to cause the operator to lose of the unit. Blade thrust can occur without
warning if the blade snags, stalls, or binds. This is more likely to occur in areas
where it is difficult to see the material being cut.
For cutting ease and safety, approach the weeds being cut with the brush cutter
from the right to the left. In the event an unexpected object or woody stock is
encountered, this practice could minimize the blade thrust reaction.
MAINTENANCE
WARNING: Before inspecting, cleaning or servicing the unit , stop the motor,
wait for all moving parts to stop,
and remove the battery pack. Failure to follow these instructions can
result in serious personal injury or property damage.
WARNING: When servicing, use only identical replacement parts . Use of any
parts may create a hazard or cause product damage.To ensure safety and
reliability, all repairs should be performed by a qualified service technician.
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to
damage from various types of commercial solvents and may be damaged by their
use. Use clean clothes to remove dirt, dust, oil, grease, etc.
CLEAN THE MACHINE
◾
After each use of 3-teeth blade / trimmer head, clean the debris, clogged soils
or grass on the blade and guard with a soft brush.
NOTICE: When the line-cutting blade becomes dull, please sharpen it performed