background image

1.1.8

Relevant laws, institutions and authorities

Name of the institute/author-
ity

Relates to

Standard

Regional gas or energy suppli-
er (GVU) or network operator

Gas supply

Installation of the unit

TAB (Technical
Connection
Conditions)
GAS (Low
Pressure Gas
Supply (NDAV))

Building inspection authorities

Gas supply

Installation of the unit

BauO (Building
Regulations);
LBO (Regional
Building Regula-
tions)

Trading standards office

Installation of the unit

GewO (Trade,
Commerce and
Industry regula-
tions)

Responsible district chim-
ney/heating inspector

Gas supply

Installation of the unit, emis-
sions

BauO (Building
Regulations);
FeuVo (Ordin-
ance on Firing
Installations),
BISchV (Feder-
al Emission
Control Ordin-
ance)

Water/waste water association
or authority

Installation of the unit

Water/waste water connections

AbwV (Waste
Water Ordin-
ance)

ATV informa-
tion sheets (As-
sociation of
Waste Water
Technicians)

Technical connection condi-
tions for connecting to the low
voltage mains network, require-
ments applying to the installa-
tion location

Mains network operators,
power suppliers

Installation of the unit

Mains connection

TAB (Technical
Connection
Conditions)
POWER (NAV
- Ordinance on
Low-Voltage
Connections)

Table 7: Relevant laws, institutions, authorities

1.2 Package dimensions and weights

NOTICE

These specifications may be modified for technical reasons.

Global Foodservice Solutions

Planning and installation instructions

8

Space

$aver

Planning

Summary of Contents for SPACE SAVER 605ESC63XXXX





































Reviews: