30
July 2003
The filter envelope should be changed after 10-12 filterings, or
whenever it becomes clogged with crumbs. Proceed as follows:
1.
Move the
COOK/PUMP
switch to the OFF position.
2.
Remove and empty the condensation drain pan.
3.
Disconnect the filter union and remove the filter drain pan
from beneath the frypot.
a.
Rinse the frypot interior. Especially work on hard-to-
clean areas, like the frypot bottom and burner tubes.
b.
After thorough rinsing with shortening, close the drain
valve.
c.
Turn the
COOK/PUMP
switch to the OFF position.
d.
Detach the hose and raise the fitting end of hose high for
a minute to allow the remaining shortening in the hose to
drain into the frypot.
5.
Turn
COOK/PUMP switch to PUMP.
6.
When all shortening has been pumped into frypot, turn
COOK/PUMP
switch to OFF.
3-9.
FILTERING
INSTRUCTIONS
(CONT.)
ONLY CONNECT AND DISCONNECT THE
FILTER RINSE HOSE WHEN THE MAIN
POWER SWITCH IS IN THE OFF POSITION.
ALSO, USE A DRY CLOTH OR GLOVE TO
AVOID BURNS. FAILURE TO DO THIS COULD
RESULT IN SEVERE BURNS FROM HOT
SHORTENING SPRAYING FROM THE MALE
FITTING.
Use protective cloth or glove when disconnecting
the filter union or severe burns could result.
If the filter pan is moved while full of
shortening, use care to prevent splashing, or severe
burns could result.
3-10.
CHANGING THE
FILTER ENVELOPE
