Henny Penny OE-100, Technical Manual

Page: 19 / 51

2-13
Model OE-100
2-14. FILTERING SYSTEM The filtering system consists of the filter valve, motor and filter pump
assembly, filter screen assembly, and tubing.
The hose and fittings should be checked daily. Hot short-
ening causes the rubber hose to age and deteriorate. If
aging or discoloration is seen, the hose should not be used.
Severe burns may result if this rinse hose assembly leaks or
ruptures.
1. Close the filter valve.
2. Turn the pump switch to the OFF position.
Installation
593
3. Detach the hose.
This hose is not connected to the fryer during normal opera-
tion.
1. Attach the filter rinse hose with its quick disconnect female fitting
to the other half male fitting inside the door, next to the filter valve
handle.
2. To do this slide back the spring ring on the female end of the
quick disconnect fitting and let it snap into place over the other
half male fitting.
3. With a quick tug on the hose, insure the quick disconnect is
locked into position.
ONLY CONNECT AND DISCONNECT THE FILTER
RINSE HOSE WHEN THE MAIN POWER SWITCH
IS IN THE OFF POSITION. FAILURE TO DO THIS
WILL RESULT IN SEVERE BURNS FROM HOT
SHORTENING SPRAYING FROM THE MALE
FITTING. ALSO, USE A DRY CLOTH OR
PROTECTIVE GLOVE TO AVOID BURNS.
TURN OFF POWER