Important: Always read and follow the operating instructions.
• 9
107.
After lubrication, insert the lift bar at the duck-
head, a small amount of lubrication on the bar will
assist in lift tool positioning. The Robo Arm can be used
to push the tire sidewall down.
108.
Before rotating the bead up and on the duck-
head, use the Robo Arm to push the upper bead into
the rim’s drop center.
109.
If may be necessary to push the tire sidewall
down at several locations to ease the stress in the tire
bead.
110.
Once the bead is located on the duckhead, the
lift tool maybe removed completely.
Next, jog the machine rotation a short distance and
observe the bead removal. Continue to rotate the rim
until the bead is completely removed.
111
. Lower bead removal is typical with standard
procedures. The RoboArm may be used to assist in
holding the lower bead up in the wheel’s drop center.
