Important: Always read and follow the information box instructions.
• 5
Use the offset arm to measure A2 and D2 automati-
cally when using the T2 - Tape (hidden Tape-A-Weight
®
)
location. Place the offset arm at the weight placement
location as shown in figures 6A & 6B.
Figure 6A - Hidden Weight Location Viewed on a Cut-Away
Rim for Clarification.
Note:
The A2 and D2 dimensions are only required
when the
T2 - Tape
Direct Select™ Weight position is
selected.
Figure 6B - T2-Tape (Hidden Tape-A-Weight
®
) Data Entry
Diagram
Note:
Throughout this manual wheel weights are
referred to as Clip-on or Tape-A-Weight™. Figure 7
shows an example of each weight.
Figure 7 - Corrective Weight Examples. For Best Results,
use BADA
®
Brand Wheel Weights.
Clip-on Weight
Tape-A-Weight™
