Henley Arklow Installation And Operating Instructions Manual Download Page 4

Stove Commissioning Checklist 

Please complete the form below as it will be of great assistance in the unlikely event that there is a problem with the stove or a war-
ranty claim needs to be made. Please contact the installer or dealer if there is a problem. 

Dealer appliance was purchased from

Essential Information - MUST be completed

Installation engineer

Commissioning Checks (to be completed and signed)

..........................................................................................................................................
..........................................................................................................................................

........................................................................................................................................................

..........................................................................................................................................

............................................................................................................................
............................................................................................................................
............................................................................................................................

Name:

Address:

Phone:

Date installed:

Model Description:

Serial number:

............................................................................................................................
............................................................................................................................
............................................................................................................................

Company name:

Address:

Phone:

Stove correctly flued according to building regulations

Flue swept and integrity of flue verified

Smoke test completed on installed stove

Spillage test completed

Use of appliance and operation of controls explained to end-user

Check that specified clearance to combustibles has been adhered to

Instruction manual handed to end-user

HETAS Approved (Please tick relevant box):

Yes

No If Yes, please include certificate of compliance.

Yes

No

Yes

No

Yes

No

Yes

No

Yes

No

Yes

No

Yes

No

..........................

..............................................

............................................

....................................................................

...........

.......

...............................................

Signature:

.......................................................

Print name:

........................................................

4 | www.henleystoves.com

Summary of Contents for Arklow

















Reviews: