8
5 Operation
5.1 Start of Radiation Cycle
As soon as the dual channel controller is switched on one radiation cycle can be started
if the chamber door is closed.
5.2 Door Safety Protection
The door safety system is to protect operator safety. The cure cycle will be interrupted
once the chamber door is opened during operation, an error message
“Emergency stop”
will be displayed on the warning tab of dual channel controller and a warning beep
occurs. This error will be displayed if the cure cycle is interrupted by the user. The
radiation cycle can be start again until the warning message is cleared.
5.3 Shutdown
•
Remove unit from power supply.
5.4 Returning to Operation
•
Check installation regarding section 4.
•
Connect unit to power supply.
6 Service and Maintenance
The polycarbonate window of the door may just be cleaned with antistatic plastics
cleaner (i.e. from Company AKU) and a soft cloth to avoid stress cracking and damage
of the antistatic coating. The inner walls of the chamber can best be cleaned with
ordinary window cleaner or pure alcohol.
