Precision Balance
- 8 -
Display range
Zero0/1/2/3/4/5
Item 10,
Page 10
Parameter Function Description
1. When the screen shows
press the
key, the current internal value will be
displayed. Press
key to return to the display
。
2. When the screen shows
, press
key to enter into unit selection mode, the screen
will show
or
,
“on” means to use the current unit displayed,
“oFF” means not to use the current unit displayed. Press
to switch between
ON and OFF [to use the unit
displayed select
“on”, if you do not require the unit displayed select “oFF”]. Press
to select from 5 kinds of
weighing units, after selecting the unit required, press
to return to the display
。
3. When the screen shows
, press
to enter initial unit selection mode. LCD display
means the initial unit is g, press
to switch the unit required, then Press
key
to return to the display
。
4. When the screen shows
, press
to enter the RS-232 transfers Rate selection. LCD
display
represents the RS-232 transfers rate. Press
key to return to the display
。
『
9600
』
